General Description
The RTS5116 is a high-performance USB 2.0 card reader controller that integrates a USB 2.0 PHY, an SIE (Serial Interface Engine), an 8051 MCU, a ROM, a RAM, and a memory card controller onto a single chip. It supports access to Memory Stick?, Memory Stick PRO?, Secure Digital? and MultiMediaCard?. The built-in high-speed USB 2.0 device controller provides a 480Mbps transfer rate and offers backward compatibility with the 12Mbps USB 1.1 specification.
Designed with an enhanced power control circuit, the RTS5116 fully complies with USB power specifications for bus-powered devices. Confirming to the USB Mass Storage Class Specification, the RTS5116 provides "plug and play" convenience without any driver installation.

The external serial EEPROM interface provides flexibility in storing a USB Vender ID, a Product ID, and also other vender content such as product information, a revision level, a serial number, etc. The four-bit EEPROM interface can be programmed to function as general-purpose I/Os.

To reduce the BOM, the RTS5116 integrates 5V to 3.3V and 3.3V to 1.8V regulators. The RTS5116 also provides 2 built-in PMOS for power control of memory cards. With limited external components required, the 48-pin LQFP packaged RTS5116 provides an ideal cost/performance ratio for high-performance USB2.0 flash memory card reader/writer applications.

Features
Compliant with Universal Serial Bus Specification Revision 2.0
Compliant with USB Mass Storage Class Bulk Only Transport Specification Rev. 1.0
Supports high-speed (480Mbps) and full-speed (12Mbps) data transfer
Supports USB bus-powered operation
Supports Control, Bulk, and Interrupt USB data pipes
Supports hardware CRC (Cyclic Redundancy Check) function
Programmable clock rate for Flash memory card interfaces
Supports MS-PRO 4-bit parallel transfer mode
Supports MS 4-bit parallel transfer mode
Supports high-speed 50Mhz SD 4-bit card (version 1.1)
Supports high-speed 52Mhz MMC 8-bit card (version 4.x)
Integrated Fast 8051 microprocessor
External serial EEPROM interface
12MHz crystal oscillator with integrated PLL
Built-in 5V to 3.3V regulator
Built-in 3.3V to 1.8V regulator
Built-in PMOS
Single 3.3V operating voltage
48-pin LQFP

Supports the following memory card interfaces:

• Secure Digital ? (SD), MultiMediaCard? (MMC)

Memory Stick? (MS), Memory Stick PRO? (MS-PRO)