Wireless and RF-PLL / Synthesizer / VCO-

Parameter	Value
RF Output Frequency Range (MHz)	1930-1990
Supply Voltage (V)	5
Package (mm)	38-pin MCM, 9 x 12 x 1.7
Current Consumption (mA)	120
Output Power (dBm)	-10
Phase Noise @ 100 kHz (dBc/Hz)
Phase Noise @ 800 kHz (dBc/Hz)	-139
Phase Noise @ 200 kHz (dBc/Hz)	-112
Phase Settling Time (µS)	300
Phase Noise @ 1 MHz (dBc/Hz)

Skyworks SKY73101-11 Voltage-Controlled Oscillator (VCO)/Synthesizer is a fully integrated, high performance signal source for high dynamic range transceivers. The device provides ultra-fine frequency resolution, fast switching speed, and low phase noise performance for 2G, 2.5G, and 3G base station transceivers. The SKY73101-11 VCO/Synthesizer is a key building block for high-performance radio system designs that require low power and a fine step size. Reference clock generators with an output frequency up to 52 MHz can be used with the SKY73101-11. A functional block diagram is shown in Figure 1. As indicated in this diagram, the reference frequency is divided down by 1, 2, 4, or 8 in the R1 divider, depending on the value of the reference divisor input (R1). Refer to the Reference Input Divider section (page 10) for more information. The SKY73101-11 VCO/Synthesizer is provided in a compact, 38-pin Multi-Chip Module (MCM).

文档(Document)

No.	PDF	Description
1	SKY73101-11: 1930–1990 MHz High Performance VCO/Synthesizer With Integrated Switch	SKY73101-11: 1930–1990 MHz High Performance VCO/Synthesizer With Integrated Switch
2	http://china.skyworksinc.com/uploads/documents/200724C.pdf	http://china.skyworksinc.com/uploads/documents/200724C.pdf

SKY73101-11

文档(Document)

PRODUCTS

SOLUTIONS

NEWS

ABOUT US